L Series Dry Type Wire Drawing Machine


 

Introduction

Gongyi Telon production of continuous drawing machine drawing is the ideal equipment of low, medium and high carbon steel wire rod, and korah drawn copper, aluminum and other non-ferrous metal and alloy wire, widely used in steel wire, galvanized iron wire, wire, building components, metal wire, making factory and other industries use.This machine features high efficiency, the total compression ratio is big, drawing speed, cover an area of an area small, equipment consists of main reducer, mould box, roller frame, a wire frame and electric control system, etc.All the drawing drum by JZT series or Y series motor through a gear coupling transmission level 2 different ratio of cylindrical gear reducer, so that the drum rotating work, drawing drum for vertical, installed on the cover of housing, gear pair with oil lubrication.

The machine can realize dynamic, interactive, ahead of the drum position of machine tool operation, parking equipment safety agency.


Usage and Structure

(1)Usage:The set of the machines is a ideal equipment for drawing wire stock of high, medium and carbon steel,as well as copper, alumium, and alloy. The machines are widely used for drawing wire in the factories such as wire-steel factory,metal mesh factory and nail making factory etc.

(2)Structure:The equipment consists of main reduction box, die box, wheel frame, wire brace and electric control system, The spinning drawing blocks are driven by JZT or Y series motor, with gear coupling runs changeful gears to reduce speed. The drawing blocks are verticaly fixed in sealed box body. The gear pair are lubricated with oil. In order to lower residual heat on the surface of the block, the water cooler is installed in inwall of the block. The machine runs with crawl or linkage. The safety halt gear is installed by the position of operating block.


Features

Drawing machine, also called wire drawing machine, drawing machine, wire drawing machine belongs to the pre processing equipment for the production of standard parts and other metal products, the purpose is to put the production by the steel manufacturer to standard parts and other metal products production enterprise of wire or rod through the wire drawing machine drawing processing, make the diameter of wire or rod, roundness, internal metallurgical structure, surface finish and straightening degrees are required for standard parts and other metal products production of raw materials processing requirements.
 
Wire drawing machine is mainly used in steel wire, copper wire, stainless steel wire and other metal cable material processing, cable manufacturing industry an important processing equipment.
From mechanical drawing machine structure, working principle, can be decomposed into the part drawing and take-up part, from the electrical control can be decomposed into drawing stepless speed control and the constant tension winding synchronous control, through the tension of swinging rod position changes, the feedback control system, through the automatic operation, change the winding motor speed, so as to achieve winding and drawing two link reflects the constant tension and speed synchronization, and through the wire guide wheel motor, can be different as the speed of winding, the finished product evenly wire winding on the winding wheel, in order to realize the drawing of metal materials processing.


 \

Parameter


Model Unit LW-1-6/560 LW-1-7/450 LW-1-6/350
Control material
strength
mm δ≥110kg /mm2 128kg /mm2 δ≥140kg /mm2
Largest diameter feed mm 6.5mm 3.4mm 2.5mm
Minimum feed diameter mm 2mm 1mm 0.75mm
Drawing times/Drum diameter mm 1-6/560 1-7/450 1-6/350
Largest average compression ratio % 30%or so 20%or so 21%or so
Total compression rate of % 78-88.5%or so 77.9% 78%or so
Finished product reel maximum linear velocity m/min 245m /min 346.9m /min 200m /min
Host total power kw 18.5-30kw 7.5-11kw 7.5-11kw
Total equipment (about) kg 2000kg 1500kg 1000kg
Overall dimensions mm 1700×1150
×1750mm
1520×810
×1700mm
1400×800
×1500mm
    Your Contact Details To Us    
(*)Required information
  •     Agree wiht this Privacy Policy
Contact Us
     Contact Person: Mr Zhou
     Tel: 86-371-64360058
     Fax: 86-371-64360058
     Zip Code: 451200
     Address: Jianshe Road,Gongyi City,Henan Province, PR China
     

© Copyright 2014. Gongyi Telon Industry & Trade Co., Ltd All Rights Reserved         Admin Login       Mail Login       Information Release
Bookmark and Share